Main beam headlight bulb and turn
signal bulb
In the engine compartment: remove
Fig. 55
the cover.
Fuses and bulbs
In the engine compartment: main
Fig. 56
beam headlight bulb
and turn signal bulb
2
.
3
Main beam headlight bulb
Raise the bonnet.
–
›››
Move the loop
Fig. 55
in the direction
–
1
of the arrow and remove the cover.
›››
Slide connector
Fig. 56
–
2
right and pull.
Remove the bulb by disconnecting the con-
–
nector.
Installation involves all of the above steps in
–
reverse sequence.
Turn signal bulb
Raise the bonnet.
–
Move the loop
–
of the arrow and remove the cover.
Turn the bulb holder
–
clockwise and pull.
Remove the bulb by pressing on the bulb
–
holder and turning it anticlockwise at the
same time.
Installation involves all of the above steps in
–
reverse sequence.
to the left or
›››
Fig. 55
in the direction
1
›››
Fig. 56
anti-
3
63