Wheel Central Trim; Wheel Bolt Cap; Anti-Theft Wheel Nuts; Loosening The Anti-Theft Wheel Bolt - Seat Ateca 2020 Owner's Manual

Wheel central trim*

Correct positioning of the central
Fig. 33
wheel trim for steel rims.
The central trims must be removed for access
to the wheel nuts.
Removing
Attach the wire hook (vehicle tools
●
›››
page 41) to one of the recesses of the
central wheel trim and remove it.
Fitting
Fit the central wheel trim onto the rim. The
●
bottom of the "S" of the SEAT badge should
›››
align with the inflation valve
Press the central trim firmly until it locks in
●
with an audible click.
Note
There is also a valve mark on the back of
the central wheel trim that indicates the
correct alignment.
Wheel bolt caps*
Wheel: wheel nuts with caps.
Fig. 34
Removal
Fit the plastic clip (vehicle tools
●
over the cap until it clicks into place
›››
Fig. 34.
Remove the cap with the plastic clip.
●
Fig. 33 .
1
The caps protect the wheel nuts and should
be remounted after changing the tyre.
The anti-theft wheel locking bolt has a
special cap. This only fits on anti-theft locking
bolts and is not for use with standard wheel
nuts.
Self-help
›››
Fig. 31)

Anti-theft wheel nuts

Anti-theft wheel bolt with cap and
Fig. 35
adapter.

Loosening the anti-theft wheel bolt

Remove the wheel cover* or the cap*.
●
›››
Insert the special adapter Fig. 35
●
›››
hicle tools page 41) onto the anti-theft
wheel bolt and push it on as far as it will go.
Insert the wheel brace (vehicle tools) onto
●
the adapter as far as it will go.
›››
Remove the wheel bolt page
●
Note
Make a note of the code number of the an-
ti-theft wheel bolt and keep it in a safe
place, but not in your vehicle. If you need a
new adapter, you can obtain it from the
SEAT Official Service, indicating the code
number.
(ve-
1
46.
45