Setting The Driving Profile; Adaptive Cruise Control (Acc); Electronic Stability Control (Esc); Dynamic Chassis Control (Dcc) - Seat Ateca 2020 Owner's Manual

Eco profile activates the Inertia function,
thereby reducing consumption. The rest of
the driving profiles will activate the inertia use
function when the selector lever is not in the S
position, depending on how the accelerator
›››
pedal is released page 226. When the ve-
hicle is turned on again, the function is activa-
ted by default to reduce consumption.
With manual transmission, the Eco profile
changes the gear change recommendations
to facilitate more efficient driving.

Dynamic chassis control (DCC)*

DCC continuously adapts the shock absorb-
ers to the condition of the road and current
driving conditions, according to the pre-set
programme.
In the event of a fault in the DCC, the follow-
ing message is displayed on the instrument
screen Fault: shock absorber regula-
tion
Steering
The power steering varies its driving modes
and adapts to the profile selected, thus offer-
ing the best behaviour for each situation.
1) Only for 4Drive models.
Start and driving
Air conditioning
The Climatronic* can operate in Eco mode
with particularly limited consumption.

Adaptive Cruise Control (ACC)*

Depending on the driving profile, the perform-
ance of the ACC varies, to allow more sporty
acceleration and braking or a more respect-
ful fuel consumption.

Electronic Stability Control (ESC)

In the Offroad and Snow driving profiles, the
electronic stability Control (ESC)
›››
page 268 adjusts to adapt to the terrain.
In addition, hill descent control (HDC) is acti-
›››
vated in the Offroad profile page

Setting the driving profile

Centre console: Driving Experience
Fig. 166
button.
You can select the Eco, Normal, Sport, Indi-
1)
vidual, Offroad and Snow
229.
The desired mode can be selected as follows:
Turn the Driving Experience button as much
●
as necessary to light up the desired profile on
the infotainment system display and on the
same driving experience button
OR: select the desired profile in the infotain-
●
ment system from the menu that opens when
you rotate the Driving Experience button.
The features of each profile can be seen by
pressing the Profile information function
button.
1)
.
›››
Fig. 166.
»
231