Interior Lights; Driving Abroad; Dynamic Headlight Range Control - Seat Ateca 2020 Owner's Manual

Table of Contents

Advertisement

automatically when the vehicle starts to
move again.
WARNING
The risk of an accident increases if your
vehicle breaks down. Always use the haz-
ard warning lights and a warning triangle to
draw the attention of other road users to
your stationary vehicle.
Due to the high temperatures that the
catalytic converter can reach, never park
in an area where the catalytic converter
could come into contact with highly inflam-
mable materials, for example dry grass or
spilt petrol. This could start a fire.
Note
The 12-volt vehicle battery will run down
if the hazard warning lights are left on for a
long time, even if the ignition is switched
off.
The use of the hazard warning lights de-
scribed here is subject to the relevant stat-
utory requirements.

Dynamic headlight range control

The headlight range is automatically adjus-
ted according to the vehicle load status when
they are switched on.
126
Operation
WARNING
Heavy objects in the vehicle may mean
that the headlights dazzle and distract oth-
er drivers. This could result in a serious ac-
cident.

Driving abroad

The light beam of the dipped beam lights is
asymmetric: the side of the road on which
you are driving is lit more intensely.
When a car that is manufactured in a country
that drives on the right travels to a country
that drives on the left (or vice versa), it is nor-
mally necessary to cover part of the head-
light bulbs with stickers or to change the ad-
justment of the headlights to avoid dazzling
other drivers.
In such cases, the regulations specify certain
light values that must be complied with for
designated points of the light distribution. This
is known as "Tourist light".
The light distribution of the halogen and full-
LED headlights allows the specific "tourist
light" values to be met without the need for
stickers or changes in the settings.
Note
"Tourist light" is only allowed temporarily. If
you are planning a long stay in a country
that drives on the other side, you should
take the vehicle to an Authorised Technical
Service to change the headlights.

Interior lights

Lighting of the instrument panel,
displays and switches
Depending on the model, the lighting of the
instrument cluster and switches can be ad-
justed in the infotainment system, using the 
> SETTINGS > Light > Interior light-
›››
page 95
function button.
ing
With the ignition on and without light activa-
tion, the analogue instrument panel lighting
remains activated in daytime light conditions.
The lighting is reduced as the exterior light di-
minishes. In some cases, e.g. when driving
through a tunnel without the

tive, the instrument panel lighting may even
switch off. The objective of this function is to
provide the driver with a visual indication that
he or she should activate the dipped beam.
If your vehicle is equipped with a digital in-
strument panel (Digital SEAT Cockpit), the
following message will appear Turn on the
lights on the instrument panel.
function ac-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents