Settings (System And Sound); Modifying Settings; Sound Settings; System Settings - Seat Ateca 2020 Owner's Manual

Press and hold one of the icons (or press +
●
of an empty position) to display an additional
window.
Select one of the icons from the apps bar.
●
Press to delete an icon.
●

Click on an icon in the additional window to
●
replace the value.
Hold your finger on one of the icons and
●
drag it to the desired position.
To close the edit mode, press
●
tional window, or press .

Note
The shortcut bar cannot be edited when
the vehicle is moving.

Settings (system and sound)

The selection of possible settings varies de-
pending on the country, the equipment in
question and the equipment of the vehicle.

Modifying settings

The meaning of the following symbols are
valid for all system and sound settings.
All changes are automatically applied when
the menus are closed.
Symbol and its meaning
  
The setting is selected and activated or
connected.
  
The setting is not selected, disabled or
disconnected.

To open a drop-down list.
 To increase a setting value.

To increase a setting value.
in the addi-

 To go back step by step.

To go forward step by step.
 To change a setting value with the
scrollable button without adjusting.

Sound settings

Access the sound settings: HOME >
In the sound settings there may be the follow-
ing functions, information and setting options:
Equaliser
●
Position.
●
Settings.
●

System settings

Access the system settings: HOME >
In the system settings there may be the fol-
lowing functions, information and setting op-
tions:
Introduction

.

Screen.
●
Time and date.
●
Language.
●
Additional keypad languages.
●
Units.
●
Voice control.
●
Wi-Fi.
●
Applications and services
●
Manage mobile devices.
●
Reset factory settings.
●
System information.
●
Copyright.
●
Configuration wizard.
●
Adjust the volume of external audio sour-
ces
If you need to increase the playback volume
for the external audio source, first lower the
volume on the infotainment system.
If the sound from the connected audio source
is very low, increase the output volume on
the external audio source. If this is not
enough, change the input volume to medi-
um or high.
If the sound from the connected external au-
dio source is too loud or distorted, lower the
output volume on the external audio source.
If this is not enough, change the input vol-
ume to medium or low.
173