Operation With The Wiper Lever; Changing Menu Settings; Select A Menu Or An Informative Display - Seat Ateca 2020 Owner's Manual

menu. Some warnings can be confirmed and
hidden with the button of the multifunction

›››
steering wheel Fig. 75.

Select a menu or an informative display

Switch the ignition on.
●
If a message or vehicle symbol is displayed,
●
›››
press the button Fig. 75; if necessary,

several times.
To change menus, use buttons
●
›››
Fig. 75.
To open the menu or the information dis-
●
›››
played, press the button Fig. 75

a few seconds until the menu or the informa-
tive display opens automatically.

Changing menu settings

In the menu displayed, turn the right thumb-
●
wheel of the multifunction steering wheel
›››
Fig. 75 until the desired option of the menu
is highlighted. The option appears framed.
›››
Press the button Fig. 75
● 
required modifications. A mark indicates that
the system or function is activated.
Back to menu selection
Press the button or .
 
Instruments and warning/control lamps

Operation with the wiper lever

or
 
Wiper lever: control keys.
Fig. 76
or wait
As long as a priority 1
active, it will not be possible to access any
menu. Some warnings can be confirmed and
hidden with the button
Select a menu or an informative display
Switch the ignition on.
●
If a message or vehicle symbol is displayed,
●
to make the press button
To display the menus
●
turn to the selection of menus from a menu or
from an informative display, hold down the
rocker button
To change from one menu to another, press
●
the upper or lower part of the rocker switch.
To open the menu or the informative display
●
shown, press button
›››
page 77 warning is
›››
Fig. 76 .
1
; if necessary, several times.
1
›››
page 75 or to re-
.
2
or wait a few seconds
1
until the menu or the informative display
opens automatically.
Changing menu settings
In the menu displayed, press the upper or
●
lower part of the rocker switch
quired menu option is checked. The option
appears framed.
Press button to make the required modi-
●
1
fications. A mark indicates that the system or
function is activated.
Back to menu selection
Select Back on the corresponding menu to
exit.
Note
If when switching on the ignition warnings
are shown about existing faults, it might not
be possible to change the settings or show
the information as described. In this case,
go to a specialised workshop and request a
repair.
until the re-
2
87