Climatronic Controls And Functions; Temperature; Synchronisation - Seat Ateca 2020 Owner's Manual

To prevent fogging of the windows, SEAT
recommends leaving the cooling system
(compressor) turned on. To do this, press
the button. The button lamp should

light up.
The maximum heat output required to de-
●
frost windows as quickly as possible is only
available when the engine has reached its
normal running temperature.
Keep the air intake slots in front of the
●
windscreen free of snow, ice and leaves to
Climatronic* controls and functions

Temperature

/
1 2
The temperature of the right and left sides
can be adjusted separately using the adjust-
ers. The selected temperature is shown on
the display of the climate control panel.
154
Operation
ensure heating and cooling are not im-
paired, and to prevent the windows from
misting over.
The air from the vents flows through the
●
vehicle interior and is extracted by slots in
the luggage compartment designed for this
purpose. Therefore, you should avoid ob-
structing these slots with any kind of ob-
ject.
Do not smoke while air recirculation
●
mode is on, as smoke drawn into the air
conditioning system leaves residue on the
Synchronisation: press button
settings on the driver's side apply to the pas-
senger side. Use the temperature regulator
for the passenger side to set a different tem-
perature.
evaporator, producing a permanent un-
pleasant odour.
It is advisable to turn on the air condition-
●
ing at least once a month, to lubricate the
system gaskets and prevent leaks. If a de-
crease in the cooling capacity is detected,
a Technical Service should be consulted to
check the system.
When the engine is under extreme strain,
●
switch off the compressor for a moment.
In the centre console: Climatronic con-
Fig. 145
trols.

so that

The set air temperature is kept constant. Tem-
perature and the amount and distribution of
air are controlled automatically. Automatic
mode is switched off when the fan power is
changed manually.