Seat Ateca 2020 Owner's Manual page 290

screen are seen differently and imprecise-
ly.
Certain objects may not be shown or may
●
not be shown very clearly, for example,
posts or thin rails, due to the screen resolu-
tion or if light conditions are insufficient.
The cameras have blind spots in which
●
obstacles and people are not registered.
WARNING
The smart technology incorporated into
the Top View Camera* system cannot over-
come the limits imposed by the laws of
physics and it only works within the limits of
the system. The greater convenience provi-
ded by the Area View system should never
tempt you to take any risk that may com-
promise safety. If used negligently or invol-
untarily, it may cause serious accidents
and injuries. The system is not a replace-
ment for driver awareness.
Adapt your speed and driving style to suit
●
visibility, weather, road and traffic condi-
tions.
Do not be distracted from the traffic by
●
looking at the screen.
Monitor the area around the vehicle at all
●
times, since the cameras do not capture
small children, animals and certain objects
in all situations.
The system will probably be unable to
●
represent all areas clearly.
288
Driving
CAUTION
The camera images are only two-dimen-
●
sional. Due to a lack of spatial depth, ob-
jects that jut out or holes on the road, for
example, are more difficult to detect or
may not be seen at all.
In certain circumstances, the camera
●
does not capture objects such as beams,
fences, posts or thin trees, which could
damage the vehicle.
The system displays the auxiliary lines
●
and boxes regardless of the vehicle's envi-
ronment, no objects are detected. The driv-
er is responsible for determining that the
vehicle will fit in the parking space.
Area View system
Viewing the top view system: aerial
Fig. 209
view.
There are four different views to choose from:
Front camera area
A
Right camera area
B
Rear camera area
C
Left camera area
D
Function buttons:
Exit the current display.

Adjust the display: bright, contrast and

colour.
Three-dimensional views

Depending on the equipment: connect-

ing and disconnecting the ParkPilot
sound.
The aerial view is generated by combining
the images from all the cameras
›››
Fig. 209. The aerial view can be selected
by pressing the vehicle in the area.
Select the corresponding view by pressing
›››
the different areas Fig. 209
aerial view or the reduced aerial view.
Conditions necessary for the use of the
Area View system
The doors and the rear lid must be closed.
●
The image must be reliable and clear. For
●
this reason, for example, the camera lens
must be clean.
The area around the vehicle must be clear-
●
ly and totally visible.

to of the
A D