WARNING
If messages are ignored, the vehicle may
stall in traffic and cause accidents and se-
vere injuries.
Never ignore the messages displayed.
●
Stop the vehicle at the next opportunity
●
and in a safe place.
Note
To avoid affecting the correct operation of
the system, take the following points into
consideration:
Regularly clean the area of vision of the
●
camera and keep it in a clean state, without
snow or ice.
Do not cover the field of vision of the
●
camera.
Always replace damaged or worn blades
●
when required to avoid lines on the cam-
era's field of vision.
Check that the windscreen is not dam-
●
aged in the area of the camera's field of vi-
sion.
The use of outdated maps on the naviga-
●
tion system may cause the system to show
traffic signs incorrectly.
In the waypoints mode of the navigation
●
system, the traffic sign detection system is
only partly available.
Failure to heed the control lamps and
●
corresponding text messages when they
82
Operation
light up may result in damage to the vehi-
cle.
Time
Setting the time on the infotainment sys-
tem
Press the function button > SETTINGS
●
to set the time
> Time and date
›››
page
91.
Setting the time on analogue the instru-
ment panel
To set the time (for all vehicle clocks), press
●
and hold the button
on the instrument
panel until the Time is displayed.
Release the button
. The time is dis-
●
played on the instrument panel display and
the hours field is highlighted.
Afterwards, press the button
●
desired time is displayed. To scroll quickly,
hold the button
.
When they have finished setting the hour,
●
wait until the minute field is marked on the in-
strument panel display.
Afterwards, press the button
●
desired time is displayed. To scroll quickly,
hold the button
.
Release the button
in order to finish
●
setting the time.
Adjusting the time in the SEAT Digital
Cockpit
In the Driving data menu, select the
●
function (function button > View >
Range
Driving data > Range
Press the button
●
steering wheel until the Service menu is dis-
played on the instrument panel display
›››
page
76.
Select the menu Time .
●
Adjust the correct time by turning the right
●
thumbwheel of the multifunction steering
wheel.
Revolution counter
The rev counter indicates the number of en-
gine revolutions per minute.
Together with the gear-change indicator, the
until the
rev counter offers you the possibility of using
the engine of your vehicle at a suitable
speed.
The beginning of the red zone of the rev
counter indicates the maximum speed in any
gear after running-in and with the engine hot.
until the
However, it is advisable to change up a gear
or move the selector lever to D (or lift your
foot off the accelerator) before the needle
reaches the red zone
).
on the multifunction
›››
.