Operating The Cruise Control; Adjusting The Speed; Reinstating The Cruise Control - Seat Ateca 2020 Owner's Manual

Table of Contents

Advertisement

WARNING
Use of GRA could cause accidents and se-
vere injuries if it is not possible to drive at a
constant speed maintaining the safety dis-
tance.
Do not use GRA in heavy traffic, if the dis-
tance from the vehicle in front is insuffi-
cient, on steep roads, with several bends or
in slippery circumstances or on flooded
roads.
Never use the CCS when driving off-road
or on unpaved roads.
Adapt your speed and the distance to the
vehicles ahead in line with visibility, weath-
er, the condition of the road and the traffic
situation.
To avoid unexpected operation of the
cruise control system, turn it off every time
you finish using it.
It is dangerous to use a set speed which is
too high for other conditions.
If driving down a steep gradient, the GRA
cannot maintain a constant speed. The
speed can increase. In this case, brake and
change down a gear.
Driver assistance systems

Operating the cruise control

On the turn signal lever: controls for
Fig. 174
operating the GRA.
Connecting
›››
Move the control
Fig. 174
If no speed has been programmed, the sys-
tem will not control it.
Activating the cruise control
›››
Press button
Fig. 174
in area
2
The current speed is stored and the cruise
control is activated.
Temporarily interrupting
›››
Move the control
Fig. 174
step on the brake.
The cruise control system is switched off tem-
porarily. The speed is stored.

Reinstating the cruise control

Press button
Cruise control is activated at the stored
speed.

Adjusting the speed

While the GRA is set, the stored speed can be
adjusted with button
To increase in increments of 1 km/h (1 mph)
briefly press button
.

To increase the speed without interruption,
›››
keep button
the area

to
.
1

To reduce in increments of 1 km/h (1 mph)
briefly press button
.

To reduce the speed without interruption,
›››
keep button
the area

.

The vehicle adapts the current speed by ac-
celerating or stopping accelerating. The vehi-
cle does not brake actively.
Switching off
to
or
1

Move control
The system is disconnected and the memo-
rised speed is deleted.
›››
Fig. 174
in area
.
2

›››
Fig. 174
:
2
›››
Fig. 174
in the area
2
Fig. 174
pressed down in
2
.
›››
Fig. 174
in the area
2
Fig. 174
pressed down in
2
.
›››
Fig. 174
to
.
1

241

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents