Driving Situations; Physical Limitations Inherent To The System - Seat Ateca 2020 Owner's Manual

The lamp flashes in the corresponding rear-
●
view mirror even though the turn signal has
not been activated.
The steering wheel vibrates to warn the
●
driver of the risk of collision.
torque is applied to correct the steering
●
and return the vehicle to its lane.

Driving situations

Schematic representation:
Fig. 191
situation with traffic behind the vehicle.
cation from the blind spot detector in the left-
hand external mirror.
Driver assistance systems
Schematic representation:
Fig. 192
tion of passing and then moving into the right-
hand lane. Indication from the blind spot de-

tector in the right-hand external mirror.
In the following situations, an indication will
be displayed in the external mirror
›››
(arrow) or Fig. 192

When being overtaken by another vehicle
●
›››
Fig. 191 .

When passing another vehicle
●
with a speed differential of approx. 10 km/h

Passing

(6 mph). If the vehicle is passing at a consid-
Indi-

erably higher speed, no indication will be dis-
played.
The faster a vehicle approaches, the sooner
an indication will be displayed in the exterior
mirror, because Side Assist takes into account
the different in speed compared to other ve-
hicles. Thus even though the distance from
the other vehicle is identical, the indication
will appear sooner in some cases and later in
others.

Physical limitations inherent to the system

In some situations the lane departure warning
may not interpret the traffic situation correct-
ly. I.e. in the following situations:
on tight bends;
●
in the case of lanes with different widths;
●
in areas with significant gradient changes;
●
in adverse weather conditions;
●
Situa-

in the case of special constructions to the
●
side of the vehicle, e.g., high or irregular divid-
ers.
›››
Fig. 191
(arrow):

›››
Fig. 192
261