Extend Port Config - Panasonic PN28080i-TH Operation Manual

3.1.10. Extend Port Config

Select "Basic Config" and "Port Config" and then "Extend Port Config" to open the
screen shown in Figure 3-10. On this screen, you can configure port status display
settings and mode and other settings.
Screen Description
Global Jumbo Sta- Displays the jumbo frame settings.
tus
Enable
Disable
Port Number Displays the port number.
Type Displays the port type.
1000T
1000X
Link Status Displays the current link status.
Up
Down
Port Name Displays the port name.
Figure 3-10 Extend Port Config
The jumbo frame is enabled.
The jumbo frame is disabled.
(Factory default setting)
The port type is 1000BASE-T.
The port type is SFP expansion port.
A link has been established successfully.
A link has not been established.
30