Calibration Submenus - Ultramat 23 - Siemens Set CEM CERT Operating Instructions Manual

8.4.2 Calibration submenus – ULTRAMAT 23
After you touch the <Calibration U23> button in the main menu, the submenu below
with the parameters described in the following table appears.
Control panel
Start AUTOCAL
Calibrate
NO
Set CEM CERT
Operating Instructions, 03/2020, A5E34491309-11
component , e.g. Calibrate
Meaning
Display of the current time
Setting of the start time of a daily AUTOCAL
Start of AUTOCAL
Access to the calibration menu
Operation
8.4 Submenus
43