Table of Contents
Advertisement
Installation
5.2 Installing the measuring system
5.2
Installing the measuring system
NOTICE
Inability of system to function
Make sure that the material is not damaged during installation.
The control cabinets are designed for upright mounting on a base plate or base.
Therefore, please ensure a suitable base surface.
Use lifting equipment designed for the weight of the system (approximately
200 to 400 kg depending on components) for installing the Set CEM CERT system.
Generally, only the lifting eyes on the top of the base frame are to be used for lifting the
cabinet.
When the device is stationary, secure it all around to prevent it from falling over.
Mounting brackets are provided on the base frame of the cabinet for this purpose.
26
Operating Instructions, 03/2020, A5E34491309-11
Set CEM CERT
Advertisement
Table of Contents
