Table of Contents
Advertisement
Operation
The Set CEM CERT system can be controlled during operation using the control panel on
the door. This prevents you from having to open the door and thereby falsifying the
measured values.
Note: The labeling of the buttons presented in this manual serves as an example and
can be different in your system.
8.1
Display and input keys
After switch-on, the start screen with the display of measured values appears.
The current measured values are displayed in the start screen. The status of the system
is indicated here with messages on a colored background (in this case 'System OK'). You
reach the main menu via the <Menu> button.
Below the display are eight function keys. On Set CEM CERT, only the <F1> and <F8>
keys are active. They have the following meaning:
Key
F1
F8
Set CEM CERT
Operating Instructions, 03/2020, A5E34491309-11
Meaning
Access to the input menus; there: advance within the menu structure
Return to the previous level
8
39
Advertisement
Table of Contents
