Return Address - Siemens Set CEM CERT Operating Instructions Manual

Appendix
A.2 Returns
Decontamination declaration
With this declaration you confirm "that the device/spare part has been thoroughly
cleaned, is free of residues, and that the device/spare part represents no danger for
mankind and environment."
If the returned device/spare part has come into contact with poisonous, corrosive,
flammable or polluting substances, you must thoroughly rinse, clean and neutralize the
device/spare part before returning it, in order to ensure that all hollow areas are free of
hazardous substances. Check the item after it has been cleaned.
SIEMENS will return devices or spare parts to you at your expense if a decontamination
declaration is not included.
SIEMENS will only service returned products or spare parts if this decontamination
declaration is enclosed which confirms that the products or spare parts have been
correctly decontaminated and are therefore safe to handle. The decontamination
declaration must be visibly attached to the outside of the packaging in a firmly secured
transparent document bag.
A form for the Declaration of Decontamination is available from Services & Support
Services & Support (https://support.industry.siemens.com/cs/gb/en/sc).
A.2.2

Return address

For quick identification and elimination of causes of error, we ask you to return the
devices. The return address responsible for your location can be found here:
Return address
technology/Pages/default.aspx)
74
(https://www.automation.siemens.com/mcms/aspa-db/en/automation-
Operating Instructions, 03/2020, A5E34491309-11
Set CEM CERT