Onboard Device Configuration - VIA Technologies EPIA-P910 User Manual

6.5.7. OnBoard Device Configuration

The OnBoard Device Configuration screen has the following features.
Figure 40 Figure 40: Illustration of : Illustration of OnBoard Device Configuration screen
Figure Figure 40 40 : Illustration of : Illustration of
6.5.7.1. OnBoard LAN Enable 6.5.7.1. 6.5.7.1. 6.5.7.1. OnBoard LAN Enable OnBoard LAN Enable OnBoard LAN Enable
The OnBoard LAN Enable feature determines whether the onboard LAN
controller will be used or not.
6.5.7.2. 6.5.7.2. EuP/ErP Lot6 support EuP/ErP Lot6 support
6.5.7.2. 6.5.7.2. EuP/ErP Lot6 support EuP/ErP Lot6 support
The EuP/ErP Lot6 Support feature enables the BIOS to reduce the power draw
to less than 1W when the system is in standby mode. This feature has two
options: enabled and disabled.
6.5.7.3. 6.5.7.3. 6.5.7.3. S5 Wakeup On LAN 6.5.7.3. S5 Wakeup On LAN S5 Wakeup On LAN S5 Wakeup On LAN
The S5 Wakeup On LAN feature enables the BIOS to allow remote wake-up
from the S5 power off state through the PCI bus.
OnBoard Device Configuration screen
OnBoard Device Configuration screen OnBoard Device Configuration screen
EPIA- - - - P910 EPIA P910 User Manual User Manual
EPIA EPIA P910 P910 User Manual User Manual
54