Removing/Replacing the AC Adaptor
t
Unlock (1) the AC adaptor and then detach (2) it.
Power Connection/Safety Precautions
–
Only use original Sartorius AC adaptors. The AC adaptor has an IP rating of IP40
in accordance with EN 60529.
–
Make sure that the voltage rating printed on the manufacturer's ID label is
identical to that of your local mains voltage.
–
If the stated supply voltage or the plug design of the AC adaptor does not comply
with your country's standard, please inform the nearest Sartorius representative.
–
The power must be connected in accordance with the regulations applicable
in your country.
t
1) First of all, plug the AC adaptor into the socket at the back of your balance.
t
2) Afterwards, plug the AC adaptor into an electrical outlet (mains power supply).
4.6
Warm-up Time
0
0
y To ensure accurate results are delivered, the balance must warm up for at least
30 minutes after initial connection to the power supply.
Only after this time will the device have reached the required operating
temperature.
30
30
When a verified balance of accuracy class
to the mains power, it must warm up for at least one hour before operation.
Getting Started
k
for use in legal metrology is connected
®
®
User Manual Secura
, Quintix
, Practum
®
15