Buttons For Weighing, Printing, And Export Functions - Sartorius Cubis MCA Series Operating Instructions Manual

Operating Design
4.8.3

Buttons for Weighing, Printing, and Export Functions

Symbol Name
[Leveling] button
[isoCAL] button
isoCAL
[Result] button
Prc
[Zero] button
[Tare] button
[Tare 1] button
[Tare 1 Entry] button
Tare 1 0 .00 g
[Delete Tare 1] button
[Start] button
[Quit] button
[Confirm] button
[Save] button
[Print memory] button
[Print] button
[Connect] button
[Connector] button
[Ionizer] button
[Unit change] button
g
[Restart] button
[Report] button
30 Operating Instructions Cubis
Description
Opens the Leveling Wizard.
Starts the isoCAL function.
Toggles between the result and weight value display for the
current application, e.g. weighing in percent.
Starts zeroing.
Starts taring.
Stores the current weight value in the tare 1 memory.
Opens an entry field for manually entering the tare 1 value.
Deletes the tare 1 memory.
Starts the selected application.
Quits the active application and opens the Print Memory
display.
Confirms the current display and initializes the next step.
Saves the weight value and sends it to the print memory.
Opens the Print Memory display.
If the Print Memory is displayed: Exports the saved print
orders via the integrated data interfaces.
Checks the connection to a connected printer and prints a
test page.
Checks the connection to the respective connector.
Only for a licensed ionizer: Starts an ionization process.
— Toggles between the weight units and the resolution.
— Accesses the "Unit change" function menu.
If an application is active: Deletes the saved values and
restarts the application.
If an application is active, e.g. density determination:
Displays a report about the progress of the application.
| MCA Models
®