Siemens SIMOTION ADI4 Manual page 50

Parameter assignment
3.5 Function parameters
The following sections show the basic system structure and the respective boundary
conditions of the individual homing methods.
Exiting the dialog box
If the "DP Slave Properties" dialog box is exited with "OK", the data are accepted and the
dialog box is closed.
Step 1: End
Step 1 of the ADI4 DP slave parameter assignment is now complete.
50
SIMOTION ADI4 - Analog Drive Interface for 4 Axes
Manual, 05/2009, 6FC5 297-0BA01-0BP6