Dp Cycle Tdp - Siemens SIMOTION ADI4 Manual

3.6.5

DP cycle TDP

Procedure
In the "Factor" entry field of the "DP cycle (ms)", enter a value such that the resulting DP
cycle is equal to the equidistant DP cycle.
Dialog: Start
Dialog: DP slave properties
Figure 3-11
SIMOTION ADI4 - Analog Drive Interface for 4 Axes
Manual, 05/2009, 6FC5 297-0BA01-0BP6
Tab: Isochronous operation
Entry field: Factor = 16 (example value)
"DP Slave Properties" dialog box
3.6 Parameter assignment of the DP communication
Parameter assignment
59