Siemens SIMOTION ADI4 Manual page 79

2. Settings in the "Encoder - Data" dialog box
Settings:
Encoder data settings
Encoder pulses per revolution
Number of data bits
Multiplication factor of the absolute
actual value (Gn_XIST2)
Multiplication factor of the cyclic
actual value (Gn_XIST1)
SIMOTION ADI4 - Analog Drive Interface for 4 Axes
Manual, 05/2009, 6FC5 297-0BA01-0BP6
Figure 4-7 Encoder data settings
4.3 Absolute encoder (SSI), multiturn
Value
Encoder parameters: "Increments/revolution (resolution)"
Encoder parameters: "User data length of the encoder"
1 (The absolute actual value (Gn_XIST2) is taken over
directly)
2^
(STEP 7, HW Config: "Reserved bits for fine resolution")
Commissioning
= 2 = 2048
11
79