Siemens SIMOTION ADI4 Manual page 77

Settings in STEP 7, HW Config
Figure 4-5
STEP 7 settings, HW Config
Encoder type
Resolution
MsgLength
Encoding
Reserved bits for fine resolution
SIMOTION ADI4 - Analog Drive Interface for 4 Axes
Manual, 05/2009, 6FC5 297-0BA01-0BP6
Encoder settings in STEP 7, HW Config
4.3 Absolute encoder (SSI), multiturn
Corresponding encoder parameters
Encoder parameters: "Encoder type"
Encoder parameters: "Increments/revolution (resolution)"
Encoder parameters: "User data length"
Encoder parameters: "Actual value protocol format"
Note: The value is permanently set by ADI4.
Commissioning
77