Commissioning
4.2 Absolute encoder (SSI), single-turn
SIMOTION/TCPU settings
After you have created a new encoder in the project navigator of SIMOTION SCOUT under
"EXTERNAL ENCODERS" and have assigned the technology object parameters in the
displayed dialog boxes, e.g. "Axis Type" and "Units", the encoder data must be entered in
the "Encoder Assignment" and "Encoder - Data" dialog boxes.
1. Settings in the "Encoder Assignment" dialog box
74
Figure 4-3
Encoder assignment settings
SIMOTION ADI4 - Analog Drive Interface for 4 Axes
Manual, 05/2009, 6FC5 297-0BA01-0BP6