Table of Contents
Advertisement
ADJUSTING THE REAR BRAKE
CONTROL LEVER AND THE GEAR
SHIFT LEVER
T h e c o n t r o l l e v e r s a r e p o s i t i o n e d
ergonomically during the assembly of the
vehicle.
If necessary, it is possible to adjust the
position of the levers.
◆
Position the vehicle on the stand, see p.
82 (POSITIONING THE VEHICLE ON
THE STAND).
◆
Partially unscrew the screw (1).
◆
Rotate the eccentric (2) in order to find
the optimal position of the pedal (3).
◆
Tighten the screw (1) and make sure that
the eccentric is stable in its position.
If it is necessary to further adjust the
gear shift lever, contact your local
aprilia Dealer.
68
use and maintenance RSV mille TUONO
EXHAUST SILENCER/EXHAUST
TERMINAL
Tampering with the noise control
system is prohibited.
Owners are warned that the law may
forbid:
– any person, other than for purposes of
maintenance, repair or replacement to
remove or render inoperative any device or
element of design incorporated into any
new vehicle – for the purpose of noise
control – prior to its sale or delivery to the
ultimate purchaser or while it is in use;
– the use of the vehicle after such device or
element of design has been removed or
rendered inoperative by any person.
Check the exhaust silencer and the
silencer pipes, making sure that there are
neither signs of rust, nor holes and that the
exhaust system works effectively.
If the noise produced by the exhaust
system increases, immediately contact
your local aprilia Dealer.
- RSV mille R TUONO
Advertisement
Table of Contents
