Infrared Remote Control Module Control And Management; Connecting A Communications Cable; Setting And Adding An Infrared Remote Control Module - Huawei ECC800 User Manual

Data center controller
Hide thumbs Also See for ECC800:
Table of Contents

Advertisement

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
6.7 Infrared Remote Control Module Control and
Management
In the FusionModule500 scenario, the automatic startup function is added for civil smart
cooling products. The infrared remote control module controls the startup of smart cooling
products through the monitoring module.

6.7.1 Connecting a Communications Cable

Procedure
Step 1 Connect the T/H sensor to the COM1 port on the ECC800-Pro using a network cable.
Step 2 Connect the infrared remote control module to the T/H sensor using a network cable.
----End

6.7.2 Setting and Adding an Infrared Remote Control Module

Prerequisites
Context
After an infrared remote control module is replaced, you need to add the new infrared remote
control module on the ECC800-Pro WebUI.
Procedure
Step 1 Set monitoring parameters for the infrared remote control module.
1.
Table 6-34 Setting a device address
Address
1
2
Issue 06 (2020-04-22)
The infrared remote control module is connected to the ECC800-Pro, and both are
powered on.
You have obtained the IP address of the ECC800-Pro as well as the user name and
password used for WebUI login.
You have prepared a PC with an IP address in the same network segment as that of the
ECC800-Pro, and the PC is connected to the WAN port on the ECC800-Pro.
Set the device address to 2 by setting the DIP switch on the infrared remote control
module.
Table 6-34
describes how to set the DIP switch.
The DIP switch consists of toggle switches 1–5 (from left to right). Toggle switches 1–4
specify the address of the infrared remote control module. Toggle switch 5 specifies the
address of the RS485 build-out resistor. 0 indicates OFF and 1 indicates ON. Toggle
switch 5 is set to OFF.
Toggle
Switch 1
ON
OFF
Copyright © Huawei Technologies Co., Ltd.
Toggle
Toggle
Switch 2
Switch 3
OFF
OFF
ON
OFF
6 Feature Description
Toggle
Switch 4
OFF
OFF
170

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ecc800-pro

Table of Contents