Commissioning Configuration Wizard - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
4.
----End

5.3 Commissioning Configuration Wizard

Context


Procedure
Step 1 Log in to the ECC800-Pro WebUI as an administrator.
Step 2 Choose Maintenance > Configuration Wizard to access the parameter configuring page for
the deployment wizard.
Step 3 Configure related parameters on the page as instructed. For details, see the function
description on the left of the page.
Issue 06 (2020-04-22)
Use the Service Expert app to authenticate the startup password.
a. Open the mobile phone app or pad app, and log in to the FusionModule800 device
login page using the administrator account.
Ensure that the IP address is 192.168.245.10, the default administrator name is
admin, and the default password is Changeme.
b. If the message displayed on the page is changed from "Initial startup password
authentication" to "Activated", the startup password authentication is complete.

After the first login, change the password in time to ensure system access security.
 When the mobile phone app connects to the monitoring system, the WiFi function of the monitoring
system is disabled by default. Before connecting the mobile phone app to the monitoring system,
enable the WiFi function on the WebUI. For security, you are advised to disable the WiFi function
when the app is not in use.
 If a password is used for a long time, it may be stolen or cracked. The longer it is used, the higher
the risk of theft and cracking. Change the password once three months.
 You are advised to use a mobile phone that has not been rooted to reduce the risk of information
leakage.
 It is recommended that you use different user names to log in to both the ECC800-Pro WebUI and
app at the same time. If you use the same user name to log in to the WebUI and app at the same time,
either of them will be forcibly logged out.

If an exception in network or an unexpected exit from the app occurs, the original user can log in
immediately and the newly-added user needs to wait 5 more minutes to log in.

The iDCService app supports only the Android system.
 The iDCService app is available only in Chinese.
Only administrators are entitled to perform the configuration wizard.
Currently, commissioning wizard is provided for the following functions: Smart
Module Settings, Basic Param Settings, Add Devices, Add Sensor, Plan View, Power
Dist Settings, Temp Control Settings, Linkage Test, Video Settings, and Access
Management.
The configuration wizard is displayed when you log in to the ECC800-Pro WebUI for the first time or
the system type is switched.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
97