Huawei ECC800 User Manual page 164

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Step 2 Enable camera NTP synchronization.
The camera NTP synchronization function for the server is disabled by default. The camera
NTP synchronization function needs to be enabled for the server that connects to the camera.
After the camera NTP synchronization function is enabled, cameras will automatically
time-synchronize from their access servers.
1.
2.
3.
4.
5.
----End
Follow-up Procedure



Issue 06 (2020-04-22)
Figure 6-31 Setting the external IP address of the OMU
Log in to the OMU portal of the VCN as user admin.
Choose Maintenance > Unified Configuration.
Select the server that the camera needs to access, set Module name to SCU and
Parameter type to System property, and click Search.
Figure 6-32 Configuring camera NTP synchronization
In the search results, click Edit in the row where Parameter Name is NTPIPC and set
Value to 1.
Click Save. After the camera NTP synchronization function is enabled, the camera, after
being connected to the server, will automatically time-synchronize with the server.
The VCN automatically restarts after the IP address is modified. The restart takes about 5
minutes. After the restart, use the new IP address to access the VCN.
Change the PC IP address to an address in the network segment of the new VCN IP
address, enter the VCN IP address in the address box of the Internet browser, and log in
to the OMU Portal system.
(Optional) Set up a VCN stack. For details, log in to the https://e.huawei.com/, search
for the VCN product documentation, open the documentation, and see the section
(Optional) Deploying IVS in Stack Mode.
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
153