Nuvo invu User Manual page 49

Monitoring Session
At the beginning of the first session, an Indication popup appears, explaining the use of each
button.
The following buttons are available:
•
Heartbeat sound – the beat sound you hear represents the average heart rate of the
fetus. This is a simulated sound of the heartbeat.
•
Stop the session – to manually stop the session by pressing the button.
•
Add /kicks – to manually add baby kicks.
Note:
It is not recommended to manually stop a session. The session ends automatically
once it reaches the prescribed duration (up to 5 minutes).
During the monitoring session, information is displayed according to the selected card: You
(pregnant woman) card or Baby card.
Note:
If a poor Bluetooth or internet connection is detected (which may cause a potential
delay in session), a banner will appear at the bottom of the screen displaying the estimated
delay for completing the session. See section 8.3 page 58 for instructions on how to
troubleshoot this issue.
NV-UMLS-0001
Press to
report kicks
Press to mute the
fetal simulated
heartbeat sound
Figure 6-18. Monitoring in session screen
Invu by Nuvo™User Manual
The INVU™ App
43