Using The Invu Sensor Band; Applying The Invu Sensor Band - Nuvo invu User Manual

5

Using the INVU Sensor Band™

5.1

Applying the INVU Sensor Band™

ADJUSTING THE BAND TO YOUR SIZE
Unlock the front buckles and release the front and back straps.
Flip the band over. Note the top and bottom indicators. The INVU by Nuvo™ logo should
be at the top front of the strip.
Note:
Placing the INVU Sensor Band™ is done while standing up.
Hold the band to your body, starting with the lower strap. Then do the same with the
upper strap.
The plastic units should be placed on both sides of your body. Note that all the sensors
should be touching the skin.
Figure 5-2. Positioning the INVU Sensor Band™ (note the logo at the top)
Slide your hands along the back strap and secure it by closing the back buckle. You
should hear a click sound (see Figure 5-4).
NV-UMLS-0001
Figure 5-1. Properly holding the INVU Sensor Band™
Invu by Nuvo™User Manual
Using the INVU Sensor Band™
INVU by Nuvo™
Logo on upper strip
21