First Time Using INVU by Nuvo™
Connecting via QR Code Scan
4.5
Connecting via QR Code Scan
Before using the INVU Sensor Band™, the band and mobile device need to be paired.
Connecting the band is performed by scanning the INVU Sensor Band™ QR code.
Power ON the INVU Sensor Band™.
The Controller LED lights up in steady green (see Figure 3-4).
Press Scan QR on the app screen.
Press to scan the
band QR-code
A message requesting permission for the QR scanner application to access your camera
and location services may appear. Press Allow to enable.
The INVU™ QR CODE SCAN screen appears.
18
Figure 4-3. Scan QR Code screen
Figure 4-4. Access phone message
Press to
close
Press Allow
to enable
Nuvo Group Ltd.