Nuvo invu User Manual page 18

Know Your INVU Sensor Band™
INVU Sensor Band™ Components
The Controller has two LED indicators:
•
Functional LED indicator: a 3-color LED, integrated into the On/Off power button, that
is visible from the top and side of the controller.
•
Battery charging LED indicator: a 2-color LED, adjacent to the charging port.
When power is OFF, the LED indicators are turned off. When charging, the LED indicator
near the power socket lights in orange and turns green when the battery is fully charged.
Indicator
Location
Input power
connector
(battery status)
When power is ON, the Controller LED color and state indicate the status of the device (see
Figure 3-4 above).
Indicator
Location
On/Off power
button
(status LED)
Note:
Make sure that one of the indicator lights is lit at all times during a monitoring
session.
12
Functional indicator
(for the On/Off
button)
Charging port
(Charging indicator)
Figure 3-4. Controller LEDs location
LED Color LED
Behavior
Orange Steady
Green Steady
LED Color LED
Behavior
Green
Steady
Blinking
Steady
Blue
Blinking
Steady
Red
Blinking
State/Functionality
Power OFF – Battery charging
Power OFF – Battery is fully charged
State/Functionality
Power ON – Standby, Ready to use
Power up
Power ON – Bluetooth connected
Power ON – In monitoring session
Power ON – Malfunction
Power ON –Low battery
(less than 20%)
Nuvo Group Ltd.