Nuvo invu User Manual page 31

Hide thumbs Also See for invu:
Table of Contents

Advertisement

APPLYING THE INVU SENSOR BAND™
Now that the band is adjusted to your size you can easily put it on. Hold the band side
plastic parts and wear the band, as instructed in STEP 1.
When properly positioned on the abdomen, the INVU Sensor Band™ should look as
shown below.
Referring to Figure 5-8, please note the following:
The INVU Sensor Band™ should be fully attached to the skin of the abdomen.
The lateral units should be located on the sides as backward as possible.
The INVU by Nuvo™ logo is on the upper frontal strip of the INVU Sensor Band™.
MOVING TO THE MONITORING POSITION
Monitoring sessions are best performed in a comfortable relaxed position while lying down
on the back, sitting, or reclining in a quiet room. minimize your movements as much as
possible during monitoring.
After moving to your monitoring position, verify that the band is positioned properly; if not,
please readjust it for optimal monitoring. To tighten the band, unlock the front buckles and
pull the front adjustment straps until the belt is properly attached to the skin and is stable
on the abdomen.
NV-UMLS-0001
Figure 5-8. Correct position of the INVU Sensor Band™
Invu by Nuvo™User Manual
Using the INVU Sensor Band™
25

Advertisement

Table of Contents
loading

Related Products for Nuvo invu

Table of Contents