Nuvo invu User Manual page 46

The INVU™ App
Starting a Monitoring Session
Press to start the signal
quality check process
The monitoring session process can start after following the preparation guidelines and
applying the INVU Sensor Band™. Press "START SESSION" to start the signal quality check
process.
Starting the Signal Quality Check
The Signal Quality Check process can begin after following the session preparation guidelines
and applying the INVU Sensor Band™.
Note:
For a successful signal quality check process, please avoid movements during the
process.
Note:
The blue light on the band Controller blinks until the session ends. This indicates
that the monitoring is working properly, and that data is transferring via the Bluetooth
connection to your smartphone.
Tips for a successful monitoring session!
✓ Scrub your abdominal skin with soap and water before applying the band.
✓ Ensure the sensors are fully attached to your body all the time.
✓ Make sure you are connected to a Wi-Fi network.
✓ Start monitoring at a comfortable relaxed position: sitting, reclining or laying on your
back.
✓ Minimize your movements as much as possible during monitoring.
✓ Pay attention to INVU app sounds and notifications during the session.
✓ Avoid initiating or answering phone calls or the use of any highly consuming internet
bandwidth applications of your smartphone during the signal quality check and the
monitoring itself.
Press "START SESSION" to begin the signal quality check process.
40
Figure 6-15. Find a comfortable position
Nuvo Group Ltd.