Starting A Monitoring Session - Nuvo invu User Manual

The INVU™ App

Starting a Monitoring Session

6.4 Starting a Monitoring Session
A monitoring session can only be initiated after a session meeting was scheduled by your
care provider and during your clinic available hours.
Press the "START" button from the Home screen to start a new monitoring session. The app
automatically connects to the registered sensor band and the session preparation guidelines
are presented – see section 6.4.1. Pressing "START SESSION" on the last session preparation
guidelines screen will start the monitoring session.
Note:
From the third time you begin a monitoring session, the "Before we begin" screen is
shown instead of the full session preparation guidelines, summarizing the guidelines.
Press "FULL INSTRUCTIONS" to
show the session preparation
step by step guidelines
Press "START SESSION" to start the signal quality check process. Follow the signal quality
check screen guidelines.
Note:
If the number of sessions reached its limit, a notification that the number of sessions
exceeded its limit will be displayed after the INVU™ App and band pairing process. Please
contact Nuvo's customer service in the occurrence of such an event.
Note:
A monitoring session will not be initiated unless at least 10 minutes have passed
from the end of your last monitoring session.
36
Figure 6-9. Before we begin
Press "START SESSION" to start
the signal quality check process
Nuvo Group Ltd.