Connecting Your Device - Nuvo invu User Manual

4.4

Connecting Your Device

After a short walkthrough process, you will be requested to connect your INVU Sensor
Band™ to your account. Connecting your device will be done by scanning the QR code
located on your band.
The INVU™ App requests you to enable Bluetooth and Wi-Fi on your mobile device.
Note:
Wi-Fi connection is recommended, connect via cellular only if Wi-Fi isn't available.
To enable Bluetooth connection on your device:
Go to "settings" on your mobile device.
Enable Bluetooth.
Enable Wi-Fi and verify there is a Wi-Fi connection.
Press Connect after
Bluetooth and Wi-Fi
are enabled
The "Connect" button becomes active only after Bluetooth is enabled.
Press Connect. The Scan QR Code screen appears.
NV-UMLS-0001
Figure 4-2. Enable Bluetooth and Wi-Fi
Invu by Nuvo™User Manual
First Time Using INVU by Nuvo™
17