Nuvo invu User Manual page 28

Using the INVU Sensor Band™
Applying the INVU Sensor Band™
Before letting go, adjust the band by pulling both back straps to the sides
simultaneously, then pull each strap separately to tighten.
Verify the upper strap is placed above the abdomen and below the breasts, and that the
lower strip is placed under the abdomen.
To tighten the band, unlock the front buckles and pull the front adjustment straps until
the band is properly attached to the skin and is stable on the abdomen.
22
Figure 5-3. Closing the back straps
Figure 5-4. Adjusting the back straps
Nuvo Group Ltd.