CellScale BioTester User Manual page 65

BioTester User Manual
The load cell and gooseneck assembly should look like this when assembled. There are two
styles of load cells available (both are shown below).
The nut may be gently tightened against the gooseneck using the included wrench, while
grasping the gooseneck only to avoid transmitting torque through the body of the load cell.
Check that all components are snugly in place by gently turning the base of the load cell against
the gooseneck. All components should be finger tight while being snug enough so that the
components don't freely rotate while using the BioTester.
60