General Information; Environmental And Electrical Specifications; System Assembly; Power Connections - CellScale BioTester User Manual

1. General Information

The BioTester is a precision test instrument specifically designed for the measurement and
analysis of small biological specimens. The system includes a compact biaxial test station and an
integrated software interface to run and analyze test results. The system is intended for indoor
use only.

Environmental and Electrical Specifications

Electrical Input
Current Rating
Environmental Conditions
Installation Category
Pollution Degree
Maximum Altitude
Data Connections

System Assembly

The BioTester unit requires some assembly. See Appendix A and C.

Power Connections

Connect power supply into properly grounded 100-240VAC power source to ensure safe
operation. Ensure that the power cord is easily accessible at all times.
Uninterruptible Power Supply (UPS) is recommended to protect against data loss.
The mains supply voltage fluctuations should not exceed 10% of the nominal supply voltage.

Safety Warnings

This equipment must be used in accordance with the procedures outlined in this manual to
prevent injury and/or damage.
System Alert
The plastic covers must remain on this unit at all times to prevent injury and/or damage.
This equipment must not be disassembled by the user or modified in any way.

Approvals and Certification

This product conforms to EN61010-1:2001 and EN61326-1.
100-240VAC, 50-60Hz
2.5 Amp
Maximum Operating Temperature 25ºC
0% - 95% Relative Humidity
Category II
Degree 2
2000m
1 – USB 3.0 for camera/PC communication
1 – USB for controller/PC communication
BioTester User Manual
The use of an
1