Table of Contents
Advertisement
BioTester User Manual
Install Camera Lens
Remove the protective caps on the lens and camera body and then screw the lens and spacer
tube onto the camera . The 5mm spacer tubes come attached to the camera and lens from the
production facility. The correct camera setup can be fine-tuned at a later step. If using a fixed
focal length lens (typically 75mm), see Appendix E for installation.
Lens (10X Zoom)
Camera (inside housing)
5mm Spacers
Tube
50
Advertisement
Table of Contents
Need help?
Do you have a question about the BioTester and is the answer not in the manual?
Questions and answers