GRAPHTEC FCX4000 Service Manual page 19

Icon of the corresponding operation button is displayed in the screen to change the setting values.
Increase or decrease the setting
value using POSITION (
Select the change unit by [FAST]
key.
Contents of Operation from Menu Screen
Contents of the operation and settings that is displayed in MENU screen with [PAUSE/MENU] key is as
following:
[1] (TOOL) : Sets the setting for the operation of the tool.
[2] (ARMS) : Sets the settings and operation to position the tool and media, such as automatic
scanning of the registration marks by the ARMS.
[3] (AREA) : Sets the settings for area, magnification, rotate, mirror, etc., of the cutting.
[ ] (I/F) : Sets the settings of the condition for the interfacing with the control computer.
[ ] (ADV) : Sets the settings of the conditions for the basic operation of the plotter, such as display
language, unit of the measurements.
[ ] (TEST) : Performs the operation necessary for maintenance, such as self diagnostic test or
printout of the condition settings list.
[ ] (MEM.) : Performs the operation necessary for the output such as off-line output.
[PAUSE/MENU] : It will close the MENU screen and return to default screen.
[SLOW] : Displays the position key screen. When media is set, the tool position can be moved.
See the "Menu Tree" for list of the descriptions about each settings.
FCX4000-UM-251-9730
) key.
Example of screen to change the settings value
Menu screen
Select the setting by number keys (1,
2, 3, 4) or POSITION ( ,
keys.
3-4
3. OPERATIONS
, , )