GRAPHTEC FCX4000 Service Manual page 17

SLOW ........................................When pressing the POSITION key at the same time, the tool carriage moves
1, 2, 3, 4.....................................Selects the menu number displayed in the screen.
POSITION ( , , , ) key ........Adjusts various settings, selects numerical value changes, moves the cursor,
Reading the Screen (LCD)
Information reflecting the status will be displayed in the screen of the control panel.
Name of the button and corresponding function are displayed on the screen when a function is allocated to
the button on the control panel. Button name will be displayed in reverse when the button is enabled.
Ready Screen
(READY)
Tool condition currently using
User number
Corresponding button name of control panel
(Valid button is displayed in reverse)
FCX4000-UM-251-9730
slowly.
When the "SLOW" icon is displayed on the screen, it works as a menu key.
When the [SLOW] key is pressed in the READY screen, the current cutting/
plotting area and the position of tool carriage are displayed.
and changes the positions in the menu screen.
Menu Screen
(PAUSE/MENU)
Display of setting condition
Condition Screen
(COND/TEST)
Command : HP-GL
GP-GL
(No Display) Command Auto
Step size
: 0.1
0.05
0.25
0.01
Rotate/Mrror : R90
: Mir
R90 Mir
Priority : MANUL
PROGRA
Sort : Sort ON
3-2
3. OPERATIONS
: GP-GL Command
: HP-GL Command
: 0.1mm
:
50 µm
:
25 µm
:
10 µm
: Rotate (rotate 90°)
: Mirror
: Mirror & Rotate
: Manual priority
: Pogram priority
: Display when sort is on