Motor Belt - GRAPHTEC FCX4000 Service Manual

7.2.2 X Motor Belt
How to detach the X Motor Belt
(1) Detach the right rear corner cover (Refer to the section 7.1.2.).
(2) Detach the left rear corner cover (Refer to the section 7.1.4.).
(3) Detach the right top cover (Refer to the section 7.1.5.).
(4) Detach the left top cover (Refer to the section 7.1.6.).
(5) Detach the rear top cover (Refer to the section 7.1.10.).
(6) Detach the X flexible cable cover (Refer to the section 7.1.11.).
(7) Detach the rear bottom cover (Refer to the section 7.1.12.).
(8) Mark the position of rear X belt tension bracket before loosing the screws of the rear X belt tension
bracket as shown in the picture below.
Rear X belt tension bracket
(9) Loosen the two M4L6 binding head screws fixing from the bottom of rear X rear belt tension bracket.
FCX4000-UM-251-9370
Mark the position of rear
X belt tension bracket.
Rear X belt tension bracket
Access the screws from these holes.
7-17
7 DISASSEMBLY AND ASSEMBLY
Mark the position of X
rear belt tension bracket.