Rear Bottom Cover - GRAPHTEC FCX4000 Service Manual

7.1.12 Rear Bottom Cover

How to detach the Rear Bottom Cover
(1) Detach the right rear corner cover (Refer to the section 7.1.2.).
(2) Detach the left rear corner cover (Refer to the section 7.1.4.).
(3) Detach the left top cover (Refer to the section 7.1.6.).
(4) Detach the rear top cover (Refer to the section 7.1.10.).
(5) Detach the X flexible cover (Refer to the section 7.1.11.).
(6) Disconnect the X Flexible cable from the main board and release the X flexible cable from the cable tie.
(7) Remove the five M4L8 binding head screws holding the bottom of rear bottom cover for the FCX4000-
60.
Remove the three M4L8 binding head screws holding the bottom of rear bottom cover for the FCX4000-
50.
(8) Remove the four M4L8 flange cap screws holding the each side of rear bottom cover.
M4L8 flange cap screw
(9) Detach the rear bottom cover.
(10) Detach the X flexible cable from the rear bottom cover.
FCX4000-UM-251-9370
X Flexible cable
Cable tie
Rear bottom cover
7-8
7 DISASSEMBLY AND ASSEMBLY
M4L8 flange cap screw
M4L8 binding head screw