Rear X Belt - GRAPHTEC FCX4000 Service Manual

7.2.4

Rear X Belt

How to detach the Rear X Belt
(1) Detach the right rear corner cover (Refer to the section 7.1.2.).
(2) Detach the left rear corner cover (Refer to the section 7.1.4.).
(3) Detach the left top cover (Refer to the section 7.1.6.).
(4) Detach the rear top cover (Refer to the section 7.1.10.).
(5) Detach the X flexible cable cover (Refer to the section 7.1.11.).
(6) Detach the rear bottom cover (Refer to the section 7.1.12.).
(7) Remove the seven M3L6 binding head screws holding the rear X belt cover, and then detach it.
(8) Mark the position of X belt tension bracket before loosing the screws of the X belt tension bracket as
shown in the picture below.
Rear X belt tension bracket
FCX4000-UM-251-9370
M3L6 binding head screw
Rear X belt tension bracket
7 DISASSEMBLY AND ASSEMBLY
Rear X belt cover
Mark the position of X
rear belt tension bracket.
Mark the position of rear
X belt tension bracket.
7-23