Cutter Plunger - GRAPHTEC FCX4000 Service Manual

2.2

Cutter Plunger

This chapter describes the structures and types of the cutter plungers (cutter pens).
Cutter Plunger Nomenclature
There is two different plungers to suit the diameter of the cutter blade to be mounted (the φ1.5 mm cutter
plunger is provided as a standard accessory (PHP33-CB15N-HS)).
PHP33-CB09N-HS/PHP33-CB15N-HS
Cutter blade
Plunger-cap
(Blue: For φ0.9 mm-diameter blades)
(Red: For φ1.5 mm-diameter blades)
Structure of Cutter Plunger
PHP33-CB09N-HS/
PHP33-CB15N-HS
Hole
FCX4000-UM-251-9370
Plunger
Blade-length adjustment knob
Blade-length adjustment knob
Plunger
Cutter blade
φ0.9 mm / φ1.5 mm
Plunger-cap
(Blue) / (Red)
PHP35-CB09-HS/PHP35-CB15-HS
Cutter blade Plunger
Plunger-cap
PHP35-CB09-HS/
PHP35-CB15-HS
Blade-length adjustment knob
(Blue) / (Red)
Plunger
Cutter blade
φ0.9 mm / φ1.5 mm
Chuck
Plunger-cap
Hole
2-2
2 Description of Parts
Blade-length adjustment knob
(Blue: For φ0.9 mm-diameter blades)
(Red: For φ1.5 mm-diameter blades)