Front X Belt - GRAPHTEC FCX4000 Service Manual

7.2.3

Front X Belt

How to detach the Front X Belt
(1) Detach the right front corner cover (Refer to the section 7.1.1.).
(2) Detach the left front corner cover (Refer to the section 7.1.3.).
(3) Detach the front top cover (Refer to the section 7.1.9.).
(4) Detach the front bottom cover (Refer to the section 7.1.17.).
(5) Detach the tray assembly (Refer to the section 7.1.18.).
(6) Remove the four M3L6 binding head screws holding the front X belt cover, and then detach it.
(7) Mark the position of X belt tension bracket before loosing the screws of the X belt tension bracket as
shown in the picture below.
FCX4000-UM-251-9370
7 DISASSEMBLY AND ASSEMBLY
Front X belt cover
M3L6 binding head screw
Mark the position of X front
belt tension bracket.
Front X belt tension bracket
Mark the position of Front X
belt tension bracket.
Front X belt tension bracket
7-20