When you add the SIMATIC 300, a window is displayed in which you can define the network.
● Create a PROFIBUS DP network.
A.1.1.4
Configuring communications to a SIMATIC control
The inverter can be connected to a SIMATIC control in two ways:
1. Using the inverter GSD
2. Using the STEP 7 object manager
The following section describes how to configure the inverter using the GSD.
Frequency inverters with Control Units CU230P-2 HVAC, CU230P-2 DP, CU230P-2 CAN
Operating Instructions, 01/2011, FW 4.4, A5E02430659B AD
Figure A-2
Inserting a SIMATIC 300 station with PROFIBUS DP network
This somewhat more user-friendly method is only available for S7 controls and installed
Drive ES Basic (see Section Modularity of the converter system (Page 21)).
Appendix
A.1 Application examples
325