Configuration And Settings; Configuring The Simatic S7-300/400F Controller - Siemens SINAMICS G120 Manual

6 Configuration and Settings

6.1 Configuring the SIMATIC S7-300/400F controller

6 Configuration and Settings
Note If you only wish to download and commission the example program, please
follow the instructions in chapter
The step tables below describe what you have to do if you do not want to or cannot
use the sample code and you want to or have to configure SINAMICS G and
SIMATIC S7-300/400F CPU yourself.
6.1 Configuring the SIMATIC S7-300/400F controller
This chapter describes how the SIMATIC S7-300/400F must be configured for the
example program. Integrating the HMI panel and programming of the SIMATIC
S7-300/400F is not discussed here.
Tabelle 6-1
No. Action
1. Start STEP 7 V5.
2.
Create a new project:
Add a SIMATIC S7-300
–
station.
Enter a
–
CPU 315F-2PN/DP
(6ES7315-2FJ14-0AB0)
in the hardware
configuration of the new
station or another
S7-CPU which supports
the data record routing,
see /12/.
Assign the IP 192.168.0.1
–
with subnet mask
255.255.255.0 (for the
connection to the HMI)
Create a new Ethernet
–
network
SINAMICS G120C at S7-300/400F-DP
Beitrags-ID: 60441457, V2.2,
3 "Setup and
11/2014
Commissioning".
Remarks
67