Siemens SINAMICS G120 CU230P-2 HVAC Operating Instructions Manual page 75

•
•
•
•
• Relinquish the master control after the motor
Frequency inverters with Control Units CU230P-2 HVAC, CU230P-2 DP, CU230P-2 CAN
Operating Instructions, 01/2011, FW 4.4, A5E02430659B AD
①
Open by double-clicking on the control panel
in STARTER.
②
Fetch the master control for the converter
③
Set the "Enable signals"
④
Switch on the motor.
The converter now starts to identify the motor
data. This measurement can take several
minutes. After the measurement the converter
switches off the motor.
data identification.
Commissioning
4.5 Commissioning with STARTER
73